Announcement

Collapse
No announcement yet.

Kubota k008

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kubota k008

    how hard is it to remove the blade? an how long would it take to take off an put back on?

    as on a job thats pritty tight on space getting in soo mite have to take it off

  • #2
    If its because you're going round a corner with walls at track height, I usually put the blade in front of me. If its a general width problem, there shouldn't be an issue because the blade isnt any wider than any part of the digger ?

    To take it off you would need to remove the two pins at the end of each arm, and I would expect them to quite tight to come off as they rarely get greased, then you will need to take the pin out of the dozer ram, disconnect the hydraulic pipes and cap them off.
    Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist

    Comment

    Working...
    X