Announcement

Collapse
No announcement yet.

jcb backhoe 3cx

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jcb backhoe 3cx

    i have a jcb 3cx backhoe 2002 .i just change the master cylinders for the brakes. now it is not going forward or backward. please
    help me.

  • #2
    shuttle isolation button stuck in on the front bucket lever knob?
    or the pedal on the floor to disconnect drive is stuck down?
    or you've disturbed a fuse feeding power to the shuttle solenoids/switch on column?

    Almost certainly electrical

    are the master cylinders still behind the instrument cluster, behind the windscreen, on this age model??
    If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!

    Comment


    • #3
      Originally posted by v8druid View Post
      shuttle isolation button stuck in on the front bucket lever knob?
      or the pedal on the floor to disconnect drive is stuck down?
      or you've disturbed a fuse feeding power to the shuttle solenoids/switch on column?

      Almost certainly electrical

      are the master cylinders still behind the instrument cluster, behind the windscreen, on this age model??
      yes below windscreen

      Comment


      • #4
        Originally posted by alfalah View Post
        yes below windscreen
        My money'd be on a wire disturbed/pulled off from delving about in there changing the master cylinders then
        If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!

        Comment

        Working...
        X