Announcement

Collapse
No announcement yet.

JCB 4CX new user seeks info's!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JCB 4CX new user seeks info's!

    Hi everyone

    I recently got a 1995 JCB 4CX, I really don't know anything about the backhoe loaders!
    I got it cause the guys the I hired to do some jobs were not coming when I needed them the most, plus they charged me way too much!

    So anyway here I am..

    I decided to use the 4CX mostly because the high ground clearance, I'll use it mostly in a river, so there will be big rocks in there.
    I'm an owner of a small hydroelectric power plant so I need it to maintain the road, the river banks as well as the tubes that transfer the water.

    Right now I have this issue... Well I don't know if it's an issue..
    The previous owner(s) replaced the 4x4 button with another one, when I engage the 4x4 I see a red light above that button.
    Now when I step the brake the same light goes on!

    Is that normal?

    I also read alot about a floating JCB 3CS 4CX service manual ... Does anyone know how I can acquire it?

    Thank you in advance for your time and patience... my English are not the best!
    George

  • #2
    4WD

    when braking the machine should automatically go into 4WD
    so if the aftermarket switch is wired right it should be working

    Comment


    • #3
      Thank you so much!!


      One less thing to worry about!
      Expect more from me!


      Kind Regards
      George

      Comment

      Working...
      X