Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Pel job 25.4 puma problem

  1. #1

    Pel job 25.4 puma problem

    Hi everyone.. I'm new to the forum but I would be very great full if anyone here can help me with a puma control error code it's fl4.2 ?? Thanks very much

  2. #2

    Pel job 25.4 mini digger

    Hi everyone.. I'm new to the forum but I would be very great full if anyone here can help me with a puma control error code it's fl4.2 ?? Thanks very much

  3. #3
    Admin Muz's Avatar
    Join Date
    Jan 2010
    Location
    Scotland
    Posts
    4,413
    welcome .. read the Puma thread stuff
    Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist

  4. #4
    Fabrication Guru +1 v8druid's Avatar
    Join Date
    Apr 2015
    Location
    Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
    Posts
    2,875
    Quote Originally Posted by Newholland7740 View Post
    Hi everyone.. I'm new to the forum but I would be very great full if anyone here can help me with a puma control error code it's fl4.2 ?? Thanks very much
    It's a PUMA .... seems to be the fault in general
    Muz is yer man for these damned things ... he's a thread on fault finding PUMAs somewhere here
    If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!

  5. #5
    Fabrication Guru +1 v8druid's Avatar
    Join Date
    Apr 2015
    Location
    Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
    Posts
    2,875
    Quote Originally Posted by Newholland7740 View Post
    Hi everyone.. I'm new to the forum but I would be very great full if anyone here can help me with a puma control error code it's fl4.2 ?? Thanks very much
    Quote Originally Posted by Muz View Post
    welcome .. read the Puma thread stuff
    Just said the same, as good as, in a.n.other thread by newholland ... glad I don't have anything PUMA controlled
    If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!

  6. #6
    Fabrication Guru +1 v8druid's Avatar
    Join Date
    Apr 2015
    Location
    Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
    Posts
    2,875
    oh and welcome BTW, Newholland7740
    If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!

  7. #7
    Admin Muz's Avatar
    Join Date
    Jan 2010
    Location
    Scotland
    Posts
    4,413
    Threads merged .. one question one thread please Newholland7740
    Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist

  8. #8

    Hi Newholland

    Hi, I have a eb25.4 too they are good machines. I'm not sure about your fault, does it come up on the puma device as that code? are there any beeps. Never seen a fault code. Do the codes normally appear on the screen???
    I have two beeps and some times it's hard to start, using the fantastic PUMA fault code, see thread post below, I have narrowed it down to a stop solenoid, hopefully, ordered a new one and hope it will cure all the problems.

    As an aside, is there any chance you have the manual for it, I can't find one anywhere. would love to get a copy of it.

    good luck

    Hank

  9. #9

    Peljob 25.4 dreaded puma unit

    Hello all. I have one of these machines and seem to have the same problems as most,
    and that's fault codes, I've read all the threads and have come across muz and the fault finding guide that he has put on here but it wil not let me access them in a bigger picture so I can't see it, has anyone else had this problem? Is there another way to access, as like he said that info is gold dust an would be greatly appreciated ... Cheers Alex

  10. #10
    Fabrication Guru +1 v8druid's Avatar
    Join Date
    Apr 2015
    Location
    Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
    Posts
    2,875
    Quote Originally Posted by Forestryal View Post
    Hello all. I have one of these machines and seem to have the same problems as most,
    and that's fault codes, I've read all the threads and have come across muz and the fault finding guide that he has put on here but it wil not let me access them in a bigger picture so I can't see it, has anyone else had this problem? Is there another way to access, as like he said that info is gold dust an would be greatly appreciated ... Cheers Alex
    Muz is the owner of the forum and a bit of a guru on these m/cs ..... you need full membership to be able to access certain things on here ... need 5 posts in order to verify your full membership ... or Muz might just bump your status up when he sees this post
    welcome by the way
    If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!

Similar Threads

  1. Peljob Puma Issues
    By Plantparts4u in forum Damn! its Broken ........ again ..!!
    Replies: 12
    Last Post: 18-07-2019, 12:55 PM
  2. Pel Job eb506 - Puma problems
    By Pearl in forum Everything Excavators
    Replies: 14
    Last Post: 09-07-2019, 01:30 PM
  3. Puma Fault Finding Guide
    By Muz in forum Damn! its Broken ........ again ..!!
    Replies: 0
    Last Post: 10-01-2014, 07:20 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •