Results 1 to 4 of 4

Thread: Volvo EC25 Grease nipple leaking

  1. #1

    Volvo EC25 Grease nipple leaking

    The Track Ram grease nipple is leaking, I Have changed it several times but still comes past the ball bearing. Any suggestions?


  2. #2
    New Start
    Join Date
    Jul 2019
    Down Under
    Best guess is a bad batch of grease nipples.
    If the ball seals properly, the nipple should burst (pop the ball out) before it leaks - more pressure = more sealing force.

    As a simple test, swap the nipple with another on the machine from a similar location - see if the leak follows the nipple or stays at the same place.

  3. #3
    It started with it blowing the ball bearing out of the grease nipple, since that i have swapped it with 3 others and it still leaks grease past the ball bearing, I will try with one already on. Thanks

    Do you think it could be the grease? I use 2ep.


  4. #4
    Quantity Surveyor on the up ianoz's Avatar
    Join Date
    Feb 2011
    The grease nipple can't hold the pressure there will be another pressure valve that is leaking

Similar Threads

  1. Volvo EC15C - Leaking Tracking Pedals
    By Digga in forum Everything Excavators
    Replies: 3
    Last Post: 05-05-2020, 09:31 PM
  2. Volvo EC25 safety switch problem
    By EvanJohn2012 in forum Everything Excavators
    Replies: 5
    Last Post: 31-01-2019, 09:50 PM
  3. Volvo EC25 Main Boom lowering?
    By Newtoexcavators in forum Damn! its Broken ........ again ..!!
    Replies: 6
    Last Post: 05-11-2016, 10:53 PM
  4. volvo ec25 one track wont turn
    By oggy307 in forum Hydraulics
    Replies: 6
    Last Post: 18-11-2013, 07:09 PM
  5. Volvo EC25 Hydraulic Relief Adjustment?
    By dicklund2 in forum Hydraulics
    Replies: 6
    Last Post: 26-06-2013, 07:04 PM



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts