Volvo EC 15 B digger info required

[bigdiggerdunk]

looking for some help gents
volvo info on the bucket cylinder
rod OD
open and closed centre
cylinder OD
need this for the dipper arm and the boom cylinder
hope some one can send me some details on this please

[bigdiggerdunk]

thumb_4407.png
A B or C Info required

[Muz]

All 3 are the same, 70mm cases OD and the rods are 35mm OD just that the stroke lengths are different the hoist being the longest, and bucket the shortest

[bigdiggerdunk]

thanks
any chance you have the lengths

[bigdiggerdunk]

nearest i can get is 30 mm rod

[Muz]

nearest i can get is 30 mm rod

Dont know what you mean ? .. No rod lengths available without stripping a ram, whats your issue ?

[bigdiggerdunk]

closed centre from pin centre to pin centre with the rod retracted fully
and centre to centre with the cylinder fully extended
tape measure length is fine as a guide

[Muz]

closed centre from pin centre to pin centre with the rod retracted fully
and centre to centre with the cylinder fully extended
tape measure length is fine as a guide

Ok I'll have a look monday if I get time .. whats the issue your dealing with ? are you just remanufacturinf the cylinders ?

[bigdiggerdunk]

i have a boom and need cylinders manufactured but don't have the cylinders to use
bought a boom online and plan on retro fitting it on my old powerfab digger
as the boom is missing from the old digger

[bigdiggerdunk]

Ok I'll have a look monday if I get time .. whats the issue your dealing with ? are you just remanufacturinf the cylinders ?

did you get a chance to look at the lengths for me

[Muz]

did you get a chance to look at the lengths for me

no too busy this week

[bigdiggerdunk]

no too busy this week

no issue just when you can would be great

[bigdiggerdunk]

no too busy this week

did you get a chance to get this measured up ?