Announcement

Collapse
No announcement yet.

pel job eb 25.4 wiring diagrams

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Hankstains View Post
    Some good info there Muz, something to try when it is is a little less freezing.....still need to find the pressure values for the relief valves.

    Have bought me one of those pressure testers you recommended a while ago on a rebuild project for someone so am all set to go just need some numbers.....

    As an aside which might be a part of the same problem, if I turn the machine off and leave the boom/dipper up after a few moments it starts to drop by itself with a little "creak" every ten seconds or so until after a short while it hits the deck. I was using it to lift some roof trusses up yesterday and noticed it even did it a little bit with the engine running, so after 5 mins the fully extended boom would drop 6 inches or so.....with the engine running....any thoughts....

    cheers

    Hank


    I have the hydraulic diagrams for these machines (no numbers just circuits) if anyone is interested.
    Hi Hank!
    Oh yes please, if you can share diagrams etc for this machine it is highly appreciated! Cheers!

    Comment


    • #17
      Hello can anyone help looking for a wiring diagram for EB25.4 the link in this post i cannot open, i have lost all haudralics to hand controls but it will track & blade will go up & down any help appreciated thanks.

      Comment


      • #18
        Originally posted by 360 ian View Post
        Hello can anyone help looking for a wiring diagram for EB25.4 the link in this post i cannot open, i have lost all haudralics to hand controls but it will track & blade will go up & down any help appreciated thanks.
        Link works fine for me
        Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist

        Comment


        • #19
          it won't open for me i just get this msg.........Sorry, you are not authorized to view this page. For assistance contact the site administrator. which i have done

          Comment


          • #20
            Originally posted by 360 ian View Post
            it won't open for me i just get this msg.........Sorry, you are not authorized to view this page. For assistance contact the site administrator. which i have done
            You have to be a member for three days and make 3 or more posts before some content is available, it stops spammers, and shows that you havent just come here to raid other peoples hard work ! Not sure your problem is electrical anyway, you should start your own thread about it in any case
            Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist

            Comment


            • #21
              Many thanks for the wiring diagrams, Hank!

              Comment


              • #22
                earning right to download - need this info

                Comment


                • #23
                  Originally posted by redfernos View Post
                  earning right to download - need this info
                  'Meaningful contribution' I believe is the expression .. I've deleted your other two posts, spammers have a very short lifespan round these parts
                  Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist

                  Comment

                  Working...
                  X